How to maintain the construction machinery water tank for you to share with you

In winter, because the temperature is low, the weather is relatively cold, but the engineering machinery water tank is also one of the necessary components for mechanical operation. If the water tank is frozen, it will affect the normal use of the engineering machinery water tank, so it is also necessary to pay attention to In the daily maintenance and maintenance work, in the face of this situation, how should the construction machinery water tank customer do the maintenance work? Let's get along with the car tank manufacturer!

(1) Checking the thermostat and the thermal insulation device if the diesel engine often runs at a low temperature, it will cause poor fuel atomization, fuel dripping into the cylinder and flushing the cylinder wall, which will result in a decrease in the viscosity of the lubricating oil and an increase in the wear of the diesel engine. To this end, check the working condition of the thermostat to prevent the diesel engine water temperature from being too low or too high. Also check whether the blinds work well, and if necessary, install a cold-proof device on the water radiator and other parts.

(2) Disposal of water-cooled diesel engine In summer, the water-cooled diesel engine is better cleaned with a water-stain cleaning agent to prevent the scale from accumulating and affecting the heat dissipation of the diesel engine. Once sediment is found in the water radiator, it should be removed immediately. Then replace the qualified antifreeze in time to avoid the freezing crack of the cylinder caused by the sudden cold current.

(3) Replacement and addition of antifreeze If the diesel engine has been using antifreeze, check whether the antifreeze in the tank is lower than the standard engraving. The replacement period of antifreeze is generally 2 years. When the antifreeze is turbid, deteriorated, foamed, etc., it should be replaced in time. When replacing the antifreeze, choose a long-acting antifreeze that is 10°C lower than the lower temperature of the area of use and has antifreeze in winter, anti-boiling in the summer, anti-corrosion and anti-scaling. When adding antifreeze, add the same type of antifreeze and do not mix.

It should also be noted that construction machinery is only a key part of the mechanical work. In the maintenance and maintenance work, other environments need to be maintained.

In summary, the contents are related to the construction machinery water tank manufacturers for you, more engineering machinery water tank information welcome to lock our website for more details!